Search Button
Technical Conditions and Specifications
Go Back

The ILIANTHOS Houses project consists of fourteen houses in total. All houses are in separate pieces of land. At the ground floor of each house we have the sitting area, the dining area, the kitchen, the store area and the quest toilet area. In some houses there is a maid-room and/or an office area. At the 1st floor we have the bedrooms, the office area, the laundry area and the bathroom areas. In most houses there is a swimming pool provision.
1. Construction of load bearing structure

The static load bearing structure of the building [ footings, pillars, beams, sheets and plates] shall be made of reinforced concrete in accordance with the provisions of the ant seismic code. The structure will be insulated with extruded polyester according to the thermal insulation of buildings quite.
2. Brickwork

The exterior and interior brickwork shall be of perforated bricks having dimensions of 30x20x10cm. The exterior walls shall be of double bricks with polyester insulation according to the thermal insulation of buildings quite. The interior walls shall have a thickness of 10 cm.
a. The entrance of the house at the ground floor shall be made of tiles at a price of EURO €20.00 per square meter.
b. The staircase shall be made of marble.
c. In the sitting and living room, wood flooring shall be placed with a selection of colors or tiles at the price of EURO €18.00 per square meter.
d. A ceramic tile at the price of EURO €18.00 per square meter shall be placed at the kitchen floor and between the benches and the cupboards, in the verandahs and the sanitary areas.
e. Synthetic laminate flooring shall be placed in the bedrooms and the corridors with a large selection of colors from which to choose.
f. The parking area of the vehicles shall be made of patterned concrete.
a. Exterior Wall
 Three coatings of plaster and emulsion paint of exterior use.
b. Interior Wall
 Three coatings of plaster and three coatings of emulsion paint shall be applied to all walls.

 All walls in the sanitary areas and above the kitchen benches shall be applied with two coatings of plaster and be gladded with tiles at a price of
  EURO €18.00 per square meter placed at a height of up to 2.10m.

 The walls behind the bedroom closets shall be applied with two coatings of plaster.
 The ceilings of the flats shall be applied with spatula coating and three coatings of emulsion paint
4. Insulations
 Inclinations for rain water drainage shall be created and concrete as well as bitumen felt, 4 millimeters thick and reinforced with polyester and chips shall be

 Concrete as well as water insulation material shall be applied under the tiles of the verandah.

5. Kitchen and Cabinets
 The kitchen shall be of European origin.

 The bedroom closets shall be of European origin.

6. Doors and Windows
 The door of the main entrance shall be made of wood. of compact material and fireproof design

 The intermediate doors shall be of European origin.

 The doors leading to the verandahs as well as all the windows shall be made of aluminum in a natural color of the MU100 and MU 2000 series with double-

 Exterior aluminum blinds shall be placed on bedroom windows.

7. Sanitary items / mixers
All items shall be imported of European origin, white in color. Shall include bath, shower basin, water-closets, water-basins, mixers, double kitchen sink made of stainless steel, towel racks, paper racks, soap holders and mirrors above the wash-basin.

8. Water supply and drainage system
 The installation for the cold and hot water supply shall be made with European origin pipes such as [ Henco ], or [ Pipe in Pipe ] system.

 All drains shall be made of plastic pipes.

 Provision shall be made for future connection to the town’s sewerage system.

 Water tank having a 2 cubic-meter capacity and hot water pressure tank of 200 Lts. The water is heated by central heating, solar panels and by electricity.

 Installation of a pressure system.

9. Electrical installation
 It shall be in accordance with the European standards approved by the Cyprus Electricity Authority. Electrical parts of European origin shall be installed.
 Socket outputs, telephone, elevision outputs, switches, intercom phone devices and supply points as shown on the plans.

 Provision is made for a system of television antenna and a provision for the installation of a satellite antenna.

 100W electric lamps shall be placed in all areas.

10. Air conditioning
Provision shall be made including electric cabling, with prescribed areas for the installation of air conditioning compressors. Use of pipes for the new ecological refrigerant R407A / R410A. For general specifications and the positions of the air conditioning relevant drawings will be given to the client upon contract sign.

11. Central heating
There shall be a complete central heating system of a radiator type consisting of the PIPE-IN-PIPE system. For general specifications and the positions of the heating radiators relevant drawings will be given to the client upon contract sign.

12. Metal constructions
Metal railing at the verandah, entrance and parking area, painted with oil paint.

13. Exterior works 
 General earthworks for the shaping of the exterior areas. Fencing made of walls from reinforced concrete of a height of 1.0 meters. Construction of public

 A.H.K. room for underground electricity supply.

 Fixed garbage storage room.

General Remarks
 The houses will have a post box at their entrance.

 The doorsteps of the exterior doors and the window sills will be clad with marble at a price of EURO €35.00 per square meter.

 The locks and handles of the interior doors shall be at the price of EURO €35.00 per door.

 The locks and handles for the exterior door of the houses shall be at the price of EURO €70.00 per door.

 Laminate glass on glass doors.

 Replacements of the third plaster coating with PELETICO finish.

 Exterior aluminum blinds at the bedroom windows
Projects Completed
Previous Slide
Next Slide
Copyright 2014 © Vestafoss Website Design & Developed by eBOS Technologies